OZARK MOUNTAIN CEDAR PRODUCTS
Modular Gazebo Kit Assembly
I. Site Preparation/Floor Placement
ASSEMBLY NOTES:
Improper leveling of floor section will cause problems later in assembly process. Outer edge boards of floor section will be installed after wall assembly has been completed.
| Step 1: Select fairly level ground to place floor section. Plan to position floor section where door is in desired location. |  |
| Step 2: Floor section should be set into place and leveled. Ensure ground is solid and level where the skid boards will rest. It may be necessary to use a shovel to remove sod or dirt in raised areas. The use of a 3 ft. level will provide the best results. |
If you have questions about your assembly, please call: 870-368-3235
TOLL FREE: 866-241-1243
or fax us at: 870-368-3233
You may e-mail us at: tommy@pkcedar.com
Our snail mail address is: Hc 77, Box 1895, Melbourne, Arkansas 72556
Last updated on 3/22/2006 3:10:01 PM------------------Web page design by Technidata Inc.